Binder is adding to its 707 product series with new M5 angled panel mount parts, which are aimed space-critical applications.

Binder extends 707 series with M5 angled panel mount connectors

The new 3- or 4-pin connectors of the 707 series will be. equipped with dip solder contacts for PCB mounting, and feature screw locking to ensure the reliability of the connection. Mated and locked, the interface complies with protection degree IP68. The parts will measure 7.5 mm in width.

The industrial connector specialist boasts that they can not be overtightened:

“The M5 angled panel mount parts are equipped with slightly splayed positioning pins, ” binder writes. “Hardly visible to the naked eye, these ensure the best possible protection against twisting on the PCB even before the contacts are soldered.”

“Another advantage is the deeper O-ring that seals the interface against the housing. When the panel mount parts are connected, the O-ring is pressed against the housing as far as the stop, thus optimising the sealing effect. Destruction of the seal by overtightening is basically impossible.”

Features
The 707 series angled flange connectors from are rated to 60V and 1A and withstand impulse voltages of up to 1.5 kV.

 

The brass contacts are plated in gold. Both the housing and the screw locking threaded ring are made of brass; the contact body is made of Liquid Crystal Polymer (LCP). Designed for operating temperatures of between -25 °C and +85 °C, the parts achieve a mechanical lifespan of more than 100 mating cycles, says Binder.

Possible applications identified include robotics, metrology and controls, sensor technology, machine vision and automation technology.